Showing posts with label Facts and Figures. Show all posts
Showing posts with label Facts and Figures. Show all posts

Wednesday, April 02, 2008

RTR Performance Package

It was the TVS Apache in 2006, followed by the stunning new Apache RTR that has made quite a wave in the market and we're soon anticipating the hyper-tuned version of the already powerful RTR, the TVS Apache RTR Performance Package. Here are the quick stats:

160cc, 18bhp, power-to-weight ratio: 112.5bhp/litre (as compared to   95bhp/litre for RTR, 93bhp/litre for Apache and 90bhp/litre for the Bajaj Pulsar 220!).

That's incredible specifications! And, I've not started talking about the other impressive features like twin petal discs, yet! TVS has revealed that it has incorporated the following mods to make the RTR Performance Package what it is: high-lift cam, free-flow exhaust and air filter, ECU re-map and possibly some tweaking to the intake system.

This article will look at how the above mods can squeeze out an extra 3bhp from the same engine:

HIGH-LIFT CAM: When a revised camshaft makes the intake valve to open to a larger length, it's called a high-lift cam. The logic here is to pack more charge into the cylinder by lowering the valve obstruction factor. It must be noted here that the time period through which the charge enters the cylinder is effectively increased.

FREE-FLOW DEVICES: Lesser the obstruction to filling up the cylinder with its diet, so much the better. The same holds true for driving out the combustion products. That's why kitting out an engine with after-market exhaust systems and free-er flowing air filters is one of the most popular ways of bumping up the power.

ECU RE-MAP: The ECU is responsible for spark timing, deciding the timing and quantity of fuel flow and altering these settings accordingly to suit the power demands or to compensate for abnormal combustion situations. The power and torque curves can also be varied to a greater extent by "mapping" the ECU suitably.

INTAKE SYSTEM: The length and shape of the inlet duct can go a long way in deciding how much power is developed and how it is delivered. For the start, shorter the inlet port, more is the power that can be possibly developed--assuming other factors remain constant.

|Add to Google Reader or HomepageAdd to My Yahoo!Subscribe in NewsGator OnlineAdd to My AOL|

| Add to The Free Dictionary                                                                               |

^IF YOU'RE PASSIONATE ABOUT FORMULA 1, YOU MIGHT ALSO WANT TO HAVE A LOOK AT THIS.

^STAY IN TOUCH WITH WHEELS OF RAM. CLICK HERE. 

^LOVE WHAT YOU SEE HERE? OR LOATHE? LEAVE A WORD WITH SRIRAM.

Tuesday, April 01, 2008

Why Twin Plugs

The Pulsars have been using twin-plug heads ever since 2003 and it is believed that two plugs firing the charge bring significant benefits to the table. What are they and how does it help?

In the minds of any engine designer, there is one very important goal--to combust all of the charge in the shortest possible time. We can split this into two parts: combusting all of the charge and combusting the charge in the shortest possible time. It is obvious that for maximum efficiency, whatever charge packed into the cylinder must be combusted fully to realise the full energy. If complete combustion doesn't take place, some of the fresh charge (with some energy left in it) will be taken away into the atmosphere along with the exhaust gas, which is obviously not what is wanted.

It is not enough if the engineer merely concentrates on combusting all of the charge; it has to be done in the shortest possible time. To put it the other way, the combustion has to be complete before a certain maximum time limit. That time limit is a function of the knocking characteristics of the engine. So, we can say that the combustion can be allowed to go on for as long as abnormal combustion doesn't start.

That is why the emphasis is on burning the charge in the shortest possible time. Two flame fronts can combust the charge quickly than can a single flame front. It is for this reason that Bajaj employs twin plugs in its engines. The twin plugs also allow the safe increase of compression ratio to higher than normal values without needing to fear about the adverse effects of the increase.

|Add to Google Reader or HomepageAdd to My Yahoo!Subscribe in NewsGator OnlineAdd to My AOL|

| Add to The Free Dictionary                                                                               |

^IF YOU'RE PASSIONATE ABOUT FORMULA 1, YOU MIGHT ALSO WANT TO HAVE A LOOK AT THIS.

^STAY IN TOUCH WITH WHEELS OF RAM. CLICK HERE. 

^LOVE WHAT YOU SEE HERE? OR LOATHE? LEAVE A WORD WITH SRIRAM.

Sunday, March 30, 2008

Why Diesels Are More Torquey

Most would know that diesel engines, even with the same cubic capacity as that of a comparable petrol engine, produce significantly higher torque figures than petrol engines. This article aims to give a simple explanation on why this is the case.

Torque is a function of the force developed atop the piston (due to combustion) and the length through which it acts (the length of the connecting rod). If either of these two increases, torque increases. Let us assume here that the force produced due to combustion is the same for both the same-displacement petrol and diesel engines. Then, the differentiating factor is the length of the connecting rod.

By virtue of their design, diesel engines have higher compression ratios than petrol engines. Compression ratio increases if more parts of charge gets compressed to one part. That is, instead of 6 parts of charge getting compressed to 1 part, if 10 parts get compressed to 1 part, we say that the compression ratio is higher. To compress more parts of charge, the intake of charge should be higher and more specifically the length of the charge mixture needs to higher. Fluids take up the shape of the container that they fill up. So, in diesel engines, to have compress more parts of charge, the stroke of the engine is made to be larger than the bore. This configuration is referred to as the 'under-square' configuration.

Larger stroke means larger length through which the force acts. That is why diesels are inherently more torquier than their petrol counterparts. This is also the reason why they rev lower than petrol engines.

 

|Add to Google Reader or HomepageAdd to My Yahoo!Subscribe in NewsGator OnlineAdd to My AOL|

| Add to The Free Dictionary                                                                               |

^IF YOU'RE PASSIONATE ABOUT FORMULA 1, YOU MIGHT ALSO WANT TO HAVE A LOOK AT THIS.

^STAY IN TOUCH WITH WHEELS OF RAM. CLICK HERE. 

^LOVE WHAT YOU SEE HERE? OR LOATHE? LEAVE A WORD WITH SRIRAM.

Perfect Shift Point

Manual transmission is the one to have if you love driving or riding. That's because, manual transmissions allow you to have full control over the engine power delivery, which cannot be asked of an automatic or a CVT.

Engine power delivery is nothing but how much of the engine power goes to the driven wheels. This can be controlled by altering the shifting point of each of the gears of the transmission system.

We'll first see the two extreme cases of shifting with an example: shifting to 5th gear at 20 kph in any vehicle forms one extreme of shifting point. When you do this, transmission snatch occurs. When the clutch is fully engaged and you give full gas, the engine might even stall. This is a scenario of the torque delivery being unable to match the torque requirement. Pressing on to 60 kph in 1st gear is the other extreme of shifting point. Here the engine revs too high and in most cases, even bounces off the rev-limiter.

The optimum shift point lies in between these two cases and that is a bit tricky to find. One must first decide the mode of driving--to conserve fuel or wring maximum performance from the engine. It is depending on this that the optimum shift point is determined. In cars, when a gear too high for the current speed is selected, the whole car will rattle. This can be had as an indication for a bad shifting point. Many drivers do this thinking that it will give good fuel economy. But the truth is, the mileage actually decreases. What actually happens is, the amount of fuel intake increases but with the volume of air sucked in remaining constant. This makes the mixture rich leading to incomplete combustion. This obviously wastes fuel and pollutes the environment.

At the same time, the engine should not be revved too high either. As a thumb rule, for fuel efficient driving, the optimum shift point can be the RPM which is just over half the redline RPM. For performance driving, the gear should be shifted at exactly the RPM where the manufacturer says the engine develops maximum power. This data can be had from the owner's manual.

|Add to Google Reader or HomepageAdd to My Yahoo!Subscribe in NewsGator OnlineAdd to My AOL|

| Add to The Free Dictionary                                                                               |

^IF YOU'RE PASSIONATE ABOUT FORMULA 1, YOU MIGHT ALSO WANT TO HAVE A LOOK AT THIS.

^STAY IN TOUCH WITH WHEELS OF RAM. CLICK HERE. 

Saturday, March 29, 2008

Engine Speed And Cooling

During the 'running-in' period of any new vehicle, be it a car or a bike, extra caution must be taken while driving. We should allow the various mechanical parts of the vehicle to 'bed in' properly before they can be used up to their limits. This applies even more strictly to the engine.

The owner's manual of any vehicle will carry information that resembles something like this: "vary the engine speed regularly for better cooling of the engine parts". What do they mean by this? And how will the cooling be better if the engine speed is varied? This article contains simple answers to these questions.

When the engine speed (RPM) is constant, the volume of the air-fuel mixture (charge) sucked into the engine is also constant (provided the air density doesn't change). The charge is combusted and the resulting combustion products are sent out into the atmosphere. However, it must be noted that not all the combustion products leave the engine--some portion remains inside the engine and they're referred to as the 'residual exhaust'.

The amount of residual exhaust left over from the previous cycle plays an important role in deciding the volume of fresh charge that goes into the engine when the intake stroke of the next cycle starts. If the amount of residual exhaust is constant, the amount of fresh charge sucked in remains constant too. The residual exhaust volume will remain constant when the engine speed is constant. So, we have a situation wherein, when the engine speed remains constant, the 'cooling effect' provided by the fresh charge also remains constant.

However, the temperature rise in the combustion chamber walls need not necessarily remain constant--with prolonged operation, the temperature might continue to rise. A 'non-sync' is created between the amount of cooling that the engine gets through the intake of fresh charge, and the temperature rise.

In order to combat this situation, the amount of cooling needs to increase to match or exceed the temperature rise. To increase the cooling, the amount of charge intake should be increased. And for this, the engine speed should be increased.

That's why manufacturers recommend 'varying engine speed during prolonged engine operation' specifically during running-in periods.

|Add to Google Reader or HomepageAdd to My Yahoo!Subscribe in NewsGator OnlineAdd to My AOL|

| Add to The Free Dictionary                                                                               |

^IF YOU'RE PASSIONATE ABOUT FORMULA 1, YOU MIGHT ALSO WANT TO HAVE A LOOK AT THIS.

^STAY IN TOUCH WITH WHEELS OF RAM. CLICK HERE. 

Smoking Four Strokes

We often see a plume of smoke from the back of a Formula 1 car when an engine blows up. Four stroke engines are not meant to let out smoke. Then where does that smoke come from and what is it? That's what we're going to see in this article.

It's the pressurized engine oil that's getting sprayed out of the exhaust as smoke, which might resemble the exhaust smoke coming out of two stroke scooters or bikes. Remember, in four stroke racing engines, engine oil that is stored in separate tanks, lubricate the crankshaft, cylinder walls, piston pins and other moving parts. The only area where it doesn't find its way into is the combustion chamber space. Piston rings do the job of keeping out the engine oil from the combustion chamber.

As the engine nears its failure point, the piston ring is one of the first parts in becoming vulnerable to temperature and pressure damage. When the rings eventually break, oil that is under huge pressure in the crankcase, forces its way past the piston into the combustion chamber. The pressure along with the heat of the combustion chamber makes oil to 'spray' out of the chamber into the atmosphere, which is what we see as blue smoke.

What we don't often see is 'liquid' oil pouring out from the bottom of the engine. This happens when the crankcase itself breaks apart allowing the oil within to gush out of it.

|Add to Google Reader or HomepageAdd to My Yahoo!Subscribe in NewsGator OnlineAdd to My AOL|

| Add to The Free Dictionary                                                                               |

^IF YOU'RE PASSIONATE ABOUT FORMULA 1, YOU MIGHT ALSO WANT TO HAVE A LOOK AT THIS.

^STAY IN TOUCH WITH WHEELS OF RAM. CLICK HERE. 

Monday, January 14, 2008

Tata Nano's = E Class Side Mirror's

You all would've heard a lot and read a lot about the fantastic new Tata Nano and so I'm not going to bore you with that again. But do you know that the side mirror (ORVM) of a Mercedes-Benz E Class costs more than the base version of the Nano? To quote the price exactly, it is (a whooping, I should add) Rs.123363. I was stunned on seeing that. I got this info from the excellent Jan '08 issue of Autocar India. They have done a comprehensive analysis of the spare parts market in this issue. I recommend you buy a copy from the news-stand and read it.

(The below info has been taken from the Jan '08 issue of Autocar India. Figures in Rupees).

SERVICE PARTS M800 SWIFT SX4 OCTY TDi S350
Wiper blade 154 472 450 1370 5264
A/C coil 2035 4529 4529 17940 97636
Front bumper 859 1735 2564 8368 45968
Bonnet 3024 4189 4599 12077 103688
Side mirror 130 1415 1420 5683 102722

 

|Add to Google Reader or HomepageAdd to My Yahoo!Subscribe in NewsGator OnlineAdd to My AOL|

| Add to The Free Dictionary                                                                               |

| IF YOU'RE PASSIONATE ABOUT FORMULA 1, YOU MIGHT ALSO WANT TO HAVE A LOOK AT THIS.

| STAY IN TOUCH WITH WHEELS OF RAM. CLICK HERE. 

Saturday, December 22, 2007

P220 in Numbers

Srivaths & P220 As per my friend Chandru's wish, here are some of the real world facts about the Pulsar 220 DTS-Fi:

  • Mileage: My brother has kept below 75 km/h until now and he gets around about 35 to 40 km/l.
  • Top speed: It's reported to be 130 km/h but we need to test it. But only after another 800 km of driving to clear the running-in period.
  • Fuel tank capacity: 18 litres which includes 3 litres of reserve.
  • Tyre size (MRF Zapper): Front-90/90 - 17; Rear-120/80 - 17. Unlike other Indian bikes, the tyres are tubeless.

I hope this will be ok for you, Chandru!